Description:
Nitrogen generation by Pressure Swing Adsorption (PSA) process is a technology used to separate nitrogen from a mixture of gases under pressure according to the special selective adsorption characteristics of the Carbon Molecular Sieves (CMS).
The carbon molecular sieve is a material containing tiny pores of a precise and uniform size that is used as an adsorbent for gases. When the pressure is high enough, the oxygen molecules, which pass through the pores of CMS much faster than the nitrogen molecules, are adsorbed, while the coming out nitrogen molecules will be enriched in gas phase. The enriched oxygen air, adsorbed by the CMS, will be released by reducing the pressure. Then the CMS is regenerated and ready for another cycle of producing nitrogen enriched air.
Technical Parameter:
| Type | Adsorbent pressure
(Mpa) | Nitrogen concentration
(N2%) | Nitrogen quantity
(NM3/h.t) | N2/Air
(%) |
| CMS-200 | 0.8 | 99.99 | 72 | ≥21 |
| 99.9 | 140 | ≥31 |
| 99.5 | 200 | ≥40 |
| 99.0 | 275 | ≥45 |
| 98.0 | 325 | ≥46 |
| 97.0 | 365 | ≥48 |
| CMS-220 | 0.8 | 99.99 | 85 | ≥21 |
| 99.9 | 165 | ≥31 |
| 99.5 | 220 | ≥40 |
| 99.0 | 280 | ≥45 |
| 98.0 | 335 | ≥46 |
| 97.0 | 375 | ≥48 |
| CMS-240 | 0.8 | 99.99 | 92 | ≥21 |
| 99.9 | 180 | ≥31 |
| 99.5 | 240 | ≥40 |
| 99.0 | 305 | ≥45 |
| 98.0 | 365 | ≥46 |
| 97.0 | 410 | ≥48 |
| CMS-260 | 0.8 | 99.99 | 105 | ≥21 |
| 99.9 | 205 | ≥31 |
| 99.5 | 260 | ≥40 |
| 99.0 | 310 | ≥45 |
| 98.0 | 380 | ≥46 |
| 97.0 | 425 | ≥48 |
Physical properties:
(1) Diameter of the CMS granule: 1.1-1.8mm, or customized
(2) Period of adsorption: 120S
(3) Bulk density: 680-700g/L
(4) Compressive strength: ≥ 95N/ granule
Application:
- High ratio performance & price, reducing investment cost and operation cost.
- Large hardness, little ash, long service life, uniform particles which protests air current impact.
- Stable quality: Testing strictly according to 100% standard of production and ex-factory testing management.
- The resin uses in producing the high pure nitrogen with good performance which substitutes the similar import products.
PSA Nitrogen Generation Process: 1. Air Feed System: The environment air supplied to the PSA system should be compressed and purified to get rid of the dust, the oil and water. 2. Psa Nitrogen Generation System: While the compressed and purified air flows through the adsorbent bed with CMS inside in a bottom up way under the pressure of 0.6MPa, the oxygen molecules will be absorbed by the solid surfaces of the CMS, and the enriched nitrogen will be output from the top of the bed to the container. When the adsorbent bed reaches the end of its capacity to absorb oxygen, it can be regenerated by reducing the pressure, thereby releasing the adsorbed oxygen. Using two adsorbent beds to absorb and regenerate in turn allows producing continuous nitrogen in cycle. Packing and Shipping: | Package Type | Container Load Capacity | Delivery time | Quality
Insurance |
| 20 GP | 40 GP |
| Plastic drum, 20kg/drum | 9600 kg | 19200 kg | Within 1 week | Chinese National Standard; Offer qualit |
How to get a prompt quotation?
Do not hesitate to send us mail with the following data.
1) N2 flow rate: _____Nm3/hr
2) N2 purity: _____%
3) N2 discharge pressure: _____Bar
4) N2 Outlet Dew Point: _____C
5) Your local Voltages and Frequency: ______V/PH/HZ
6) Nitrogen Application_____
7) You local Sealevel_____M
With all above data, we can make a most suitable proposal for you.
1. Our KNA Series N2 Generator Specification 1) Purity: 95-99.9999% 2) Capacity: 5-8000Nm3/h 3) Pressure out: 0-0.8Mpa (1.0~15.0MPa is also available) 4) Dew point: -45 degree-- -70 Technical Features 1). Imported pneumatic valves, using life is more than 3 million times; 2). Siemens PLC Intelligent program controller, easy and stable operation; 3). Specific inert ceramic balls diffusion technology makes airflow distribution evenly; improve the adsorption efficiency for adsorbent; 4). Self-force cylinder compress device (Patent No.: ZL-200820168079.9) to protect the using life of the Carbon Molecular Sieve; 5.) Original centrifugal vibration Filling (Patent No.: ZL-200820168078.4) effectively ensure the maximum filling volume. Why choose PSA Nitrogen Generator ? Quality Control You can be sure of the quality of solution. we uses only the best suppliers and components. And all nitrogen generators are tested & commissioned by professional Experts to make sure everything is qualified before they leave the factory. Warranty The period of warranty on the goods from YDGET is 360 days since the completion day of installation and commissioning or 420 days after receiving the goods, whichever happens earlier. Service & Support we offers a range of services to help you maximize your benefits. For maximum convenience, we offer a fixed price service agreement based on operation time or calendar time. Of course, all customers are welcome to call us at any time. We are always more than willing to assist you. 1) Consultancy Help for self-help, exchange of experience and individual support. If you have questions on plant operation or need somebody for troubleshooting, we give you advice either on the phone or in writing. The direct contact with you is very important for us as it is the basis for a permanent cooperation as partners to the benefit of both sides. 2) Commissioning Systematic from final acceptance of erection to approval of proper operation and guaranteed features. This includes extensive operational tests, professional filling with adsorbents and catalysts, proper start-up, optimal setting of operating parameters and check of all safety functions. At the same time we train your operating personnel on functions and operation of the plant. 3) Spare Parts Service Worldwide, quick and low-priced over the complete lifetime of your plant. The distinct tagging of all plant components delivered by us enables us to identify clearly the spare parts requested by you. We supply you with products designed for a long life and economic efficiency. For modifications and extensions we look for the most optimal and economic solution for your individual purpose. 4) Maintenance/Revisions Regular inspection and maintenance ensures permanent operation, avoids damage and prevents unexpected breakdowns. In the course of maintenance/revision works we check all relevant components for function and condition, exchange defect, used and worn parts and afterwards optimally eadjust your plant to the given operating conditions. Depending on the plant size and scope of work, our service range comprises also a detailed scheduling of revisions as well as coordination and supervision of contractors. As a matter of course we supply maintenance documentation in form of reports and spare part recommendations, and we coordinate our schedules according to your requirements. 5) Training Know-how for your personnel. Operation, maintenance and repair, electric measuring and control equipment or process engineering - we offer you specific training by our experts. Whether on site working with theplant itself, or on our permises, we concentrate on your questions and problems. 
Company Profile
Hangzhou Poly Air Separation Equipment Manufacturing Co.,Ltd is a professional manufacturer which produces PSA nitrogen making equipment, PSA oxygen making equipment, Vpsa Oxygen making equipment, compressed air purification equipment etc.
The company combined with the R&D, design manufacturing and marketing. qualify with the perfect production conditions, equipment installation, configuration, maintenance and service. It also hire the expert in the field of new material and engineering thermodynamics as technical consultant to ensure that our products and technical is always in the line of technology and provide a reliable and scientific guarantee of product design and manufacturing. Sinopoly air separation is becoming a technical leader in the line of compressed air purification and pressure swing adsorption.
Company's products are mainly divided into: PSA nitrogen(oxygen) equipment, VPSA analytical oxygen equipment, vacuum gas purification equipment, membrane separation nitrogen (oxygen) devices, freeze dryer, micro heat regenerative dryer, heatless regenerative dryer, heat regenerative dryer, Filter and other ten series of specifications. Products are widely used in petroleum, petrochemical, electric power, chemical industry, metallurgy industry, coal industry, pharmaceutical industry, aerospace, automotive industry, plastics industry, chemical fiber, rubber, glass industry, food industry, electronic industry and aquaculture and other fields.
Company is located in Fuyang Gaoqiao Industrial park, adjacent to Hangzhou West lake, Fuchun river, Qiandao lake and other national places of interests.
Company tenet: good faith seeks for the development good quality seeks for the brand, good belief seeks for the service.
Our service tenet: customer satisfaction is the enterprise's eternal pursuit!
HOT PRODUCTS
Packaging & Shipping
Contact Now
