Product Description
*High oxygen purity Psa Oxygen Generator plants allow production of high-purity oxygen from compressed air, This oxygen purity may also be ensured by cryogenic systems, but they are considerably more complex and justified only by large consumption volumes. The oxygen generators use zMS (zoliet Molecular Sieve) technology to produce a continuous supply of ultra high purity oxygen and are available with internal compressors or without. *Low operating costs By substitution of out-of-date Air Separation Plants nitrogen production savings largely exceed 50%.[citation needed] The net cost of oxygen produced by oxygen generators is significantly less than the cost of bottled or liquefied oxygen. *Oxygen Generators Create Less Impact on the Environment Generating oxygen gas is a sustainable, environmentally friendly and energy efficient approach to providing pure, clean, dry oxygen gas. Compared to the energy needed for a cryogenic air separation plant and the energy needed to transport the liquid oxygen from the plant to the facility, generated oxygen consumes less energy and creates far fewer greenhouse gases. 1500-99.6% PSA technology VS-1500-99.6% Membrane Technology | Items | PSA technology | Membrane Technology |
| Nitrogen output Nm3/h | 1500 |
| Nitrogen purity % | 99.6 |
| Nitrogen installation power KW | 40 | 70 |
| Air compressor installation power KW | 500 | 750 |
| Power supply V/HZ | 380/50 | 380/50 |
| Compress air consumption Nm3/min | 62 | 82 |
| Compress air inlet pressure MPa | 1.1 | 1.3 |
| The best adsorption pressure should be 8-9 barg, it would be wide selection scale for air compressor | The best adsorption pressure should be 12 barg, it would be specified required for air compressor |
| Key component using life | carbon molecular sieve for 8 years | Membrane for 4-5 years |
| Control type | PLC, Auto control | PLC, Auto control |
| Occupied land(M)(LxWxH) | 15*5*4.5 | 18*5*4.5 |
| Noise | 55DB(Maximum instant 85DB) | 55DB(Maximum instant 85DB) |
| Environmental Requirements | Indoors, ventilation,38ºC | Indoors, ventilation,38ºC |
| Investment cost | Nitrogen generator | About $225000 | About $799000 |
| Screw Air Compressor | About $93000 | About $150000 |
No matter from points of energy consumption, land, investment, maintenance cost, the PSA technology is a better Choice!! PSA oxygen generator Specification: 1) Purity: 28~95% 2) Capacity: 1~3000Nm3/h 3) Pressure out: 0.1~0.6Mpa (0.6~15.0MPa is also available) 4) Dew point: <-45ºC 5) Type: Skid-Mounted Product Features 1. Full Automation All systems are designed for un-attended operation and automatic Oxygen demand adjustment. 2. Lower Space Requirement The design and Instrumentation makes the plant size very compact, assembly on skids, prefabricated and supplied from factory. 3. Fast Start-up Start-up time is about 30 minutes to get desired Oxygen purity. So these units can be switched ON & OFF as per Oxygen demand changes. 4. High Reliability It's very reliable for continuous and steady operation with constant Oxygen purity. Plant availability time is better than 93% always. 5. Zeolite Molecular Sieves Life Expected Zeolite Molecular Sieves life is more than 10-years i.e. whole life time of Oxygen plant. So no replacement costs. 6. Low investment and energy consumption 7. Simple operation and maintenance Functional Specification: 1. The system adopts the one-click start way,Air compressor,Refrigerated Air Dryer , Adsportion dryer,Generator will start to work following the program one by one. 2. The Oxygen Generator equipped with unqualified oxygen gas warning alarm and automatic vent out ,then it can make sure that all oxygen that goes into the pipeline is good quality. 3. The oxygen generator equipped with colorful touch screen from Siemens Germany ,it can display the running condition , purity, pressure, and nitrogen rate of flow of whole system on-line;And it can also remind the maintenance time,record the trouble alarm, download the operating data. 
Company Profile
Hangzhou Poly Air Separation Equipment Manufacturing Co.,Ltd is a professional manufacturer which produces PSA nitrogen making equipment, PSA oxygen making equipment, Vpsa Oxygen making equipment, compressed air purification equipment etc.
The company combined with the R&D, design manufacturing and marketing. qualify with the perfect production conditions, equipment installation, configuration, maintenance and service. It also hire the expert in the field of new material and engineering thermodynamics as technical consultant to ensure that our products and technical is always in the line of technology and provide a reliable and scientific guarantee of product design and manufacturing. Sinopoly air separation is becoming a technical leader in the line of compressed air purification and pressure swing adsorption.
Company's products are mainly divided into: PSA nitrogen(oxygen) equipment, VPSA analytical oxygen equipment, vacuum gas purification equipment, membrane separation nitrogen (oxygen) devices, freeze dryer, micro heat regenerative dryer, heatless regenerative dryer, heat regenerative dryer, Filter and other ten series of specifications. Products are widely used in petroleum, petrochemical, electric power, chemical industry, metallurgy industry, coal industry, pharmaceutical industry, aerospace, automotive industry, plastics industry, chemical fiber, rubber, glass industry, food industry, electronic industry and aquaculture and other fields.
Company is located in Fuyang Gaoqiao Industrial park, adjacent to Hangzhou West lake, Fuchun river, Qiandao lake and other national places of interests.
Company tenet: good faith seeks for the development good quality seeks for the brand, good belief seeks for the service.
Our service tenet: customer satisfaction is the enterprise's eternal pursuit!
HOT PRODUCTS
Packaging & Shipping
FAQ
Q: Are you trading company or factory?
A: We are OEM skid-mounted Oxygen Generator factory.Welcome you to visit our company at anytime!
Q: What is the terms of payment?
A: T/T, L/C etc.
Q: How long is your delivery time?
A: Generally it is 10-50 working days depending on your order.
Q: What's the order process?
A: 1) Inquiry---provide us all clear requirements.
2) Quotation---official quotation form with all clear specifications.
3) Printing file--- PDF, Ai, CDR, PSD, the picture resolution must be at least 300 dpi.
4) Contract confirmation---provide correct contract details.
5) Payment terms--- T/T 30% in advanced, balanced before shipment.
6) Production---mass production g. Shipping,land transportation, air or courier. Detailed picture of package will be provided.
7) Installation and commissioning.
Contact Now
